Courses

    Second part of a two-course capstone design experience in mechanical engineering. Includes refinement of prototype, design optimization, fabrication, testing, and evaluation. Students orally present the final design and prepare a written report and operation manual for the product. Prerequisites: Requires prereq courses of MCEN 4026, 4043 and 4045 (all min grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering (MCEN) or General Engr Plus (GEEN-BS) students, with a sub-plan of Mechanical (MEC).
    Focuses on design and construction of microprocessor-controlled electro-mechanical systems. Lectures review critical circuit topics, introduce microprocessor architecture and programming, discuss sensor and actuator component selection, robotic systems, and design strategies for complex, multi-system devices. Lab work reinforces lectures and allows hands-on experience with robotic design. Students must design and build an autonomous robotic device. Project expenses may be incurred ($50 maximum). Same as MCEN 5115. Prerequisites: Requires prerequisite courses of ECEN 3010 and GEEN 1300 or ECEN 1310 or CSCI 1300 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Explores human physiological function from an engineering, specifically mechanical engineering, viewpoint. Provides an introduction to human anatomy and physiology with a focus on learning fundamental concepts and applying engineering (mass transfer,fluid dynamics, mechanics, modeling) analysis. Same as MCEN 5117. Prerequisites: Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Focuses on probability and statistics, emphasizing engineering applications. Topics covered include frequency distributions, statistical hypotheses and estimation, analysis of variance, quality control, correlation, and nonlinear, multiple, nonparametric, and multiple regression. Prerequisites: Requires prerequisite course of APPM 2360 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Highlights free and forced vibration of discrete and continuous systems. Examines Lagrange's equation, Fourier series, Laplace transforms, and matrix and computational methods. Applies knowledge to practical engineering problems. MCEN 4123 and ASEN 4123 are the same course. Same as MCEN 5123. Prerequisites: Requires prerequisite course of MCEN 3030 or ASEN 3112 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Addresses the relationship between material structure and the fundamental processes of deformation, yield, and fracture. Examines elements of elasticity theory, introduction to plasticity, and formulation of failure criteria. Studies basic deformation processes in terms of dislocation mechanics and macroscopic mechanical behavior. Takes into consideration the influence of compositional and processing strengthening mechanisms on mechanical properties. Prerequisites: Requires prerequisite courses of MCEN 2024 and MCEN 2063 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Applies linear and nonlinear optimization methods to the design of mechanical components and systems. Examines unconstrained and constrained optimizationas well as formulation of objective functions, including cost, weight, response time, and deflection. Applies knowledge to gears, springs, cams, and linkages. Same as MCEN 5125. Prerequisites: Requires prerequisite courses of MCEN 3025 and MCEN 3030 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Covers the design of ultrasound systems for medical imaging and therapy, including the physics of wave propagation, transducers, acoustic lenses, pulse-echo imaging and cavitation dynamics, with an emphasis on current topics in biomedical ultrasound. The course will include lectures on theory, practice and special topics; a laboratory on wave propagation; oral presentations on current literature; and a design project. Same as MCEN 5127. Prerequisites: Requires prerequisite course of MCEN 3021 (minimum grade C-). Restricted to students with 57-180 credits (juniors/seniors).
    Introduces air quality regulations, meteorology, and modeling. Examines methods for controlling major classes of air pollutants, including particulate matter and oxides of sulfur and nitrogen, as well as control technology for industrial sources and motor vehicles. Requires interdisciplinary design projects. Same as MCEN 5131. Prerequisites: Requires prerequisite course of MCEN 3021 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical or Environmental Engineering majors only.
    Considers the mechanical behavior of biological materials and emphasizes the relationship between structural characteristics and macroscopic behavior. Focuses first on the mechanical behavior of microscopic protein and polysaccharide elements and then on larger scale soft and hard tissue structures. Prerequisites: Requires prerequisite courses of MCEN 2024, MCEN 2063 and MCEN 3021 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Focuses on understanding and applying principles related to current wind energy technology. Students will apply technical coursework from throughout the ME curriculum (fluids, dynamics, circuits, economics) to the process of designing a wind turning and determining whether their proposal is feasible from an economic standpoint. MCEN 4135 and 5135 are the same course. Prerequisites: Requires prerequisite courses of MCEN 3021 and ECEN 3010 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical or Environmental Engineering majors only.
    Provides in-depth understandings of anatomy and physiology as well as introductions to transport phenomena, flow mechanics and solid mechanics in several organ systems: the cardiovascular, pulmonary, kidney, endocrine and digestive systems. It will also introduce artificial physiological systems to replace or assist physiological functions, and introduce the concepts of physiological barriers that prevent diagnosis or effective therapeutics. Same as MCEN 5137. Prerequisites: Requires prerequisite course of MCEN 4117 (minimum grade C-). Restricted to students with 57-180 credits (juniors/seniors).
    Describes the impact of indoor air pollutants on human health, including an introduction to key pollutants and their sources. Students will estimate emission factors, calculate generation/ventilation rates, quantify the impact of deposition and chemical reactions and explore relevant control technology. Current issues will also be addressed, including climate change, green building design, economic concerns, and relevance to the developing world. Same as MCEN 5141. Prerequisites: Requires prerequisite courses of MCEN 3021 and MCEN 3022 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Explores techniques for the visualization of the physics of fluid flows including seeding with dyes, particles and bubbles, and shadowgraphy and schlieren. Reviews optics and fluid physics, especially atmospheric clouds. Assignments are student-driven, to individuals and mixed teams of graduate undergraduate, engineering majors and photography/video majors. Please see http://www.colorado.edu/MCEN/flowvls/. FILM 4200, ARTF 5200, MCEN 4151 and MCEN 5151 are the same course. Prerequisites: Requires prerequisite course of MCEN 3021 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Focuses on the mechanisms by which fuel and oxidizers are converted into combustion products. Application to practical combustion devices such as Otto, Diesel, gas turbine, and power plant combustion systems. Consideration of combustion-generated air pollution, fire safety, and combustion efficiency. Recommended prereqs., MCEN 3021 and MCEN 3022. Same as MCEN 5152. Prerequisites: Requires prerequisite course of MCEN 3012 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Covers the thermodynamics and mechanics of biological membranes and biomedical colloids. Considers intermolecular and surface forces, self-assembly and colloidal stability. Addresses structure-property relationships and design principles for biomedical applications. Focuses on monolayers, bilayers, micelles, filomicelles, liposomes, polymersomes, emulsions, microbubbles, polyplexes and polyelectrolyte multilayer capsules. Same as MCEN 5154. Prerequisites: Requires prerequisite courses of APPM 2360 and PHYS 1120 (all minimum grade C-). Restricted to students with 57-180 credits (juniors/seniors).
    Examines common energy-conversion methods and devices. Topics include power-cycle thermodynamics, turbocompressor and expander processes, combustion systems, and applications and limitations of direct energy-conversion systems. Prerequisites: Requires prerequisite course of MCEN 3012 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Introduces the theory behind and applications of the finite element method as a general and powerful tool to model a variety of phenomena in mechanical engineering. Applications include structural mechanics, mechanics of elastic continua, and heat conduction. Same as MCEN 5173. Prerequisites: Requires prerequisite courses of MCEN 2023 and MCEN 2063 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Examines the failure of materials used in engineering design through a series of real world case studies. Example failure modes considered include overload, fatigue, creep, and corrosion. Example case studies include failure of aircraft, mountaineering ropes, weight training frames, and toilets. Same as MCEN 5174. Prerequisites: Requires prerequisite courses of MCEN 2024 and MCEN 2063 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Introduces various kinds of composite materials, composite fabrication techniques, the physical and mechanical behavior of composites, and analytical and experimental methodologies. Same as MCEN 5183. Prerequisites: Requires prerequisite courses of MCEN 2024 and MCEN 2063 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Presents the fundamentals, principles and experimental techniques of electrochemistry, the background of ionic or electronic conduction of metal, semiconductor, inorganic and polymer materials, and applications in the areas of batteries, fuel cells, electrochemical double layer capacitors, electrochemical photonics, sensors and semiconductor electrochemistry. Same as MCEN 5194. Prerequisites: Requires prereq courses of MCEN 2024 and 3032 (all min grade C-). Restricted to graduate students or to students with 87-180 credits (Seniors) in the College of Engineering and Applied Science or to Mech Engr Concurrent Degree students only.

    Pages