Courses

    Covers cost concepts, financial statements, and the company economic environment. Includes concepts and methods of analysis of the time value of money, comparison of project alternatives before and after taxes, cash flows, replacement analysis, risk management, and financial cash statements. Prerequisites: Restricted to students with 57-180 credits (Junior or Senior) College of Engineering students only.

    Introduces students to hands-on environmental sampling and analysis techniques for characterization of surface water, subsurface water, soils and sediments, and air. Laboratories include stream sampling, drilling, monitoring well installation, water level, slug tests, air sampling. Department enforced prereqs., CVEN 4404, 4414, and 3313 or equivalents, or instructor consent required.

    Deals with the generation, transmission, modification and detection of light. Applications include fiber optics communications, data storage, sensing, and imaging. Leads to understanding of fundamental physical principles used in the analysis and design of modern photonic systems. Prerequisites: Requires prerequisite course of ECEN 3400 (minimum grade D-). Requires a corequisite course of ECEN 3300. Restricted to College of Engineering majors only.
    Applies engineering principles to the design of heating, ventilating, and air conditioning (HVAC) systems for buildings. Covers HVAC systems description, load estimating, applied psychometrics, coils and heat exchangers, air and water distribution systems, and primary equipment and systems. Same as CVEN 5110. Prerequisites: Requires prerequisite course of AREN 3010 (minimum grade C-).
    Introduces UNIX (Linux) system administration and related topics, including trouble-shooting system and network problems, hardware and software configuration and installation, basic scripting, and security aspects of Internet hosts. Students build a Linux server from the ground up, using provided computing resources, and must maintain and secure the server themselves. Recommended prereq., CSCI 3308. Prerequisites: Requires prerequisite course of CSCI 2400 (minimum grade C-).
    Methods of analysis and design of feedback control for dynamic systems. Covers nyquist, bode, and linear quadratic methods based on frequency domain and state space models. Laboratory experiments provide exposure to computation for simulation and real time control, and typical control system sensors and actuators. Same as ASEN 5114. Prerequisites: Requires prerequisite courses of ASEN 3128 and ASEN 3200 (all minimum grade C). Restricted to Aerospace Engineering (ASEN) majors only.
    Focuses on design and construction of microprocessor-controlled electro-mechanical systems. Lectures review critical circuit topics, introduce microprocessor architecture and programming, discuss sensor and actuator component selection, robotic systems, and design strategies for complex, multi-system devices. Lab work reinforces lectures and allows hands-on experience with robotic design. Students must design and build an autonomous robotic device. Project expenses may be incurred ($50 maximum). Same as MCEN 5115. Prerequisites: Requires prerequisite courses of ECEN 3010 and GEEN 1300 or ECEN 1310 or CSCI 1300 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Given data rates, distance, reliability or bit error rates, the information required to specify the type of fiber, the source, the wave length, type of modulation, repeater or optical amplifiers, and detectors will be presented. Same as TLEN 5480. Prerequisites: Requires prerequisite course of ECEN 3400 (minimum grade D-). Restricted to College of Engineering majors only.
    Explores human physiological function from an engineering, specifically mechanical engineering, viewpoint. Provides an introduction to human anatomy and physiology with a focus on learning fundamental concepts and applying engineering (mass transfer,fluid dynamics, mechanics, modeling) analysis. Same as MCEN 5117. Prerequisites: Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Provides a comprehensive overview of developing mobile applications using a range of technologies including software developers' kits, object-oriented programming, and human interface design principles. Students incorporate leading edge technologies with their own academic pursuits and personal interests to develop mobile applications. This course also explores the social and cultural effects of app and mobile-based computing. Same as ATLS 5120. Prerequisites: Requires prerequisite course of ATLS 3020 or CSCI 1300 (minimum grade C).
    Introduces basic (artificial) neural network architectures and learning rules. Emphasizes mathematical analysis of these networks, methods of training them, and application to practical problems such as pattern recognition, signal processing, and control systems. Shows how to construct a network of "Neurons" and train them to serve a useful function. Same as ECEN 5120. Prerequisites: Requires prerequisite courses of APPM 2360 or MATH 3130 and ECEN 1310 or CSCI 1300(all minimum grade D-). Restricted to College of Engineering majors only.
    Focuses on probability and statistics, emphasizing engineering applications. Topics covered include frequency distributions, statistical hypotheses and estimation, analysis of variance, quality control, correlation, and nonlinear, multiple, nonparametric, and multiple regression. Prerequisites: Requires prerequisite course of APPM 2360 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Highlights free and forced vibration of discrete and continuous systems. Examines Lagrange's equation, Fourier series, Laplace transforms, and matrix and computational methods. Applies knowledge to practical engineering problems. MCEN 4123 and ASEN 4123 are the same course. Same as MCEN 5123. Prerequisites: Requires prerequisite course of ASEN 3112 or MCEN 3030 (minimum grade C). Restricted to Aerospace Engineering (ASEN) majors only.
    Develops enterprise level design and configuration skills on local area networking via switching and routing, as well as the provisioning of remote data communications across diverse Wan technologies, using the latest available transport and security services. Credit not granted for this course and TLEN 5460. Prerequisites: Requires prerequisite course of CSCI 4273 (minimum grade C-).
    Highlights free and forced vibration of discrete and continuous systems. Examines Lagrange's equation, Fourier series, Laplace transforms, and matrix and computational methods. Applies knowledge to practical engineering problems. MCEN 4123 and ASEN 4123 are the same course. Same as MCEN 5123. Prerequisites: Requires prerequisite course of MCEN 3030 or ASEN 3112 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Addresses the relationship between material structure and the fundamental processes of deformation, yield, and fracture. Examines elements of elasticity theory, introduction to plasticity, and formulation of failure criteria. Studies basic deformation processes in terms of dislocation mechanics and macroscopic mechanical behavior. Takes into consideration the influence of compositional and processing strengthening mechanisms on mechanical properties. Prerequisites: Requires prerequisite courses of MCEN 2024 and MCEN 2063 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Applies linear and nonlinear optimization methods to the design of mechanical components and systems. Examines unconstrained and constrained optimizationas well as formulation of objective functions, including cost, weight, response time, and deflection. Applies knowledge to gears, springs, cams, and linkages. Same as MCEN 5125. Prerequisites: Requires prerequisite courses of MCEN 3025 and MCEN 3030 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Covers the design of ultrasound systems for medical imaging and therapy, including the physics of wave propagation, transducers, acoustic lenses, pulse-echo imaging and cavitation dynamics, with an emphasis on current topics in biomedical ultrasound. The course will include lectures on theory, practice and special topics; a laboratory on wave propagation; oral presentations on current literature; and a design project. Same as MCEN 5127. Prerequisites: Requires prerequisite course of MCEN 3021 (minimum grade C-). Restricted to students with 57-180 credits (juniors/seniors).
    Introduces the field of human factors engineering and investigates human psychological, physiological and performance limitations in complex systems and why it is vital for engineers to understand human operational limitations when designing complex systems. Course includes studies of real accidents caused by human error, good and bad designs, latent conditions and accident-producing designs. Goal is an understanding of how to conduct engineering design with consideration of human factors. Prerequisites: Restricted to students with 57-180 credits (Juniors or Seniors).
    Learn the optical design process used for illumination-based optics, with an emphasis on applications in architectural lighting. Includes in-depth coverage of luminaire photometry, lamps, materials, manufacturing methods, and product performance requirements. Optical design projects will utilize optical design software and include a variety of lamp types including LEDs using both reflector and lens optics. Same as AREN 5130. Prerequisites: Requires prerequisite course of AREN 3540 (minimum grade C-). Restricted to Architectural (AREN) or Civil (CVEN) Engineering majors only.
    Involves planning and execution of chemical engineering experiments on mass transfer operations, separations, and chemical reactors. Interprets experimental data with theoretical principles and statistical analysis. Emphasizes communication with written memos, full reports, and oral presentations. Prerequisites: Requires prerequisite courses of CHEN 3130, 3220, 3320, 4330 (all minimum grade C-).
    Introduces air quality regulations, meteorology, and modeling. Examines methods for controlling major classes of air pollutants, including particulate matter and oxides of sulfur and nitrogen, as well as control technology for industrial sources and motor vehicles. Requires interdisciplinary design projects. Same as MCEN 5131. Prerequisites: Requires prerequisite course of MCEN 3021 (minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical or Environmental Engineering majors only.
    Allows students to gain practical experience with network security in a simulated network environment. Topics to be covered include system hardening, firewalls, intrusion detection, vulnerability assessment, and investigation. Credit not granted for this course and TLEN 5540. Prerequisites: Requires prerequisite course of CSCI 4273 (minimum grade C-).
    Considers the mechanical behavior of biological materials and emphasizes the relationship between structural characteristics and macroscopic behavior. Focuses first on the mechanical behavior of microscopic protein and polysaccharide elements and then on larger scale soft and hard tissue structures. Prerequisites: Requires prerequisite courses of MCEN 2024, MCEN 2063 and MCEN 3021 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical Engineering majors only.
    Focuses on understanding and applying principles related to current wind energy technology. Students will apply technical coursework from throughout the ME curriculum (fluids, dynamics, circuits, economics) to the process of designing a wind turning and determining whether their proposal is feasible from an economic standpoint. MCEN 4135 and 5135 are the same course. Prerequisites: Requires prerequisite courses of MCEN 3021 and ECEN 3010 (all minimum grade C-). Restricted to students with 87-180 credits (Senior, Fifth Year Senior) Mechanical or Environmental Engineering majors only.

    Pages