Courses

    Explores fundamental concepts and basic theory, including first and second laws of thermodynamics, properties, states, thermodynamic functions and cycles. Same as MCEN 3012. Prerequisites: Requires prerequisite course of APPM 2350 or MATH 2400 (minimum grade C-). Restricted to College of Engineering majors only.
    Introduces fluid mechanics and momentum transfer, emphasizing the application of these principles to engineering systems. Credit not granted for this course and CHEN 3200 or MCEN 3021 or CVEN 3313. Same as CHEN 3200. Prerequisites: Requires prerequisite courses of APPM 2350 or MATH 2400 and CHEN 2120 or MCEN 2023 or CVEN 2121 (all minimum grade C-). Requires a prerequisite or corequisite course of APPM 2350. Restricted to College of Engineering majors only.
    Students will participate in a previously arranged, department-sponsored cooperative education program with a government agency or industry. Recommended GPA above 3.0. Prerequisites: Restricted to students with 57-180 credits (Junior or Senior) Aerospace Engineering (ASEN) majors only.
    Students enrolled in this course participate in a previously arranged, department-sponsored cooperative education program. Department enforced restriction: GPA higher than 2.85. Recommended restriction: GPA higher than 3.00. Prerequisites: Requires prerequisite course of CHEN 2120 (minimum grade C).

    Students enrolled in this course participate in a previously arranged, department-sponsored cooperative education program with a university, government agency, or industry. This course is offered only through Continuing Education and may be repeated up to 24 credit hours (four co-op terms). Department enforced restriction: GPA higher than 2.75 is required. GPA higher than 3.00 is strongly recommended. Pass/Fail only.

    Students enrolled in this course participate in a previously arranged, department-sponsored cooperative education program with a university, government agency, or industry. This course is offered only through Continuing Education. May be repeated up to 24 total credit hours. Department enforced restriction: 2.75 GPA. Recommended restriction: 3.00 GPA. This course cannot be used to fulfill any of CEAE's degree requirements. Prerequisites: Restricted to Civil (CVEN), Environmental (EVEN), or Architectural Engineering (AREN) majors only.
    Participate in a cooperative education program working with a corporate or government entity. Individual assignments are arranged between the department and the outside employer. This course is offered only through Continuing Education. May be repeated up to 24 credit hours. Department restriction, sophomore, junior and senior EEEN and ECEN majors with GPA of 2.85 or above. Prerequisites: Requires prerequisite courses of ECEN 2260 and ECEN 3350 (all minimum grade D-).
    Students enrolled in this course participate in a previously arranged, department-sponsored education program with a university, government agency, or industry. This course is offered only through Continuing Education. May be repeated up to 24 total credit hours. Department enforced restriction: GPA higher than 2.75 is required, although a GPA higher than 3.00 is strongly recommended. Prerequisites: Restricted to Mechanical Engineering or students with a plan of Mechanical Engineering Concurrent Degree or General Engineering Plus students with a MCEN subplan.
    Examines the development of new venture creation from the entrepreneur's perspective. Provides an understanding of the entire process including opportunity identification, feasibility study, fundraising, organization, team creation, and exit strategies through case studies, oral and written presentations, and outside speakers. Taught by an experienced entrepreneur. Prerequisites: Requires prerequisite course of CSCI 2270 (minimum grade D-). Restricted to students with 57-180 credits (Juniors or Seniors).

    Credit and subject matter to be arranged. Numbered ECEN 4001-4049. Department enforced prerequisites will vary.

    Engineering course devoted to building automation and control systems. Topics include HVAC control technology and strategies, measurement and device technologies, analysis and modeling of dynamic systems, simulation of conventional and advanced control approaches, assessment of control loop performance, and hands-on direct digital control (DDC) programming exercises as used in current building control practice. Same as CVEN 5010. Prerequisites: Requires prerequisite course of AREN 4110 (minimum grade C-).
    Includes central force fields, satellite orbits, rocket dynamics, orbital transfer, interplanetary mission analysis, and perturbation due to atmospheric drag and Earth oblateness. Prerequisites: Requires prerequisite course of ASEN 3200 (minimum grade C). Restricted to Aerospace Engineering (ASEN) majors only.
    The focus of this advanced practicum course is the development of an individual thesis project. Specific class sessions will feature a combination of lectures, demonstrations, guest speakers, lab sessions, and critiques. This course also entails group work, portfolio development, critical theoretical readings, and a significant written component. May be repeated up to 6 total credit hours. Prerequisites: Requires prerequisite courses of ATLS 2000, ATLS 3010 and ATLS 3020 (all minimum grade C). Restricted to students with minor in Technology, Arts, and Media (MTAM).

    Provides an opportunity for advanced students to conduct exploratory research in chemical engineering.

    Same as ECEN 5011.

    Studies aerospace grade aluminum, magnesium, nickel, and titanium alloys. Covers heat treatment, defect structures, failure mechanisms, corrosion and its prevention, the effect of space radiation on materials, and high and low temperature effects. Introduces composite materials with a lab design and experiment. Emphasizes the selection of materials in design with procedures for choosing materials rationally. Case studies include aerogels, carbides, composites, powder metallurgy, nanomaterials, and advanced materials manufacturing technologies. Prerequisites: Requires prerequisite course of ASEN 2001 (minimum grade C). Restricted to Aerospace Engineering (ASEN) or Aerospace Engineering Concurrent Degree (C-ASEN) majors only.
    Describes aerothermodynamics and design of both rocket and air-breathing engines. Includes ramjets, turbojets, turbofans, and turboprop engines, as well as liquid, solid, and hybrid rockets. Prerequisites: Requires prerequisite courses of ASEN 3113 and APPM 2360 (all minimum grade C). Restricted to Aerospace Engineering (ASEN) or Aerospace Engineering Concurrent Degree (C-ASEN) majors only.

    Pages